How to use a Granite polishing system to maintain the shine of heavy footfall?
Granite floors have a shine that elevates the look of any room. But when we talk about cleaning granite floors, we cannot use just any old product or method, as the stone has a higher chance to get dull over the period of time. So, to keep granite floors stay shiny, an innovative solution has been discovered termed a Granite polishing system.
This innovation
has been discovered by keeping the composition of granite. As we all know that
granite is made of a variety of materials, it’s a type of plutonic rock. So, by
seeing its composition the solution is made which is termed as Novagranite
polishing system. Well in this blog will discuss all the Granite systems? &
How can it be used on granite floors?
The process & use
of the Novagranite Polishing system
Granite system or
Bonastre Novagranite consists of 3 components: liquid, powder & a stainless
steel disc. It’s been designed to achieve the highest resistant mechanical
shine, a quick solution for a badly damaged granite floor, & it restores
the floor by bringing back the shine. It has 3 products
- White liquid Novagranite for
granite clear surface,
- Novagranite black liquid
used for dark granite,
- Whereas its Granite
polishing powder or grey powder is used for all the granites.
Some of its
features are
- Available in any measures
- Medium-high difficulty
system
- To clean & polish
- Spectacular lasting shine
- Anti-slip shine even in the
wet
- Use with a press of 2HP or
drill or radial
Novagranite powder
Rotary, 50 grams x m²
Drill: 4-6
m2
Novagranite Liquid
Rotary, 50 grams x
m²
Drill: 4-6 m2 Inox
disk from 50 to 100 m2
How to use it.
- The 1st step
is to add 30 to 50 grams per m² of No vagrant powder and mix it with No
vagrant liquid (50 grams per m²) and use it until dried with a
stainless-steel disc. (If you are using this on any new construction site,
then 1st do a preliminary test to confirm the nature of the soil and
protect the baseboards)
- Before filling to a sprayer,
shake the Novagranite liquid
- Use a stainless-steel disc
under a slow-moving machine
- Work until it completely
dries it of the cream thus formed in crossed passages.
- If you find that you didn’t
get the desired result, it can be repeated
- Make sure to wash stainless
steel discs for reuse.
- After the polishing
operation, in the case of a mixture of marble, granite, or green marble
with other marbles, use the Novagranite liquid with a disc of natural
fiber to optimize the brightness.
Process for
maintaining surfaces with high traffic
Alter the condition
of the surface, be careful not to leave it below 40 brightness points
• Spread the Novagranite
LIQUID on the floor
• Use a
stainless-steel disc.
• Work until
completely dry in transverse passages.
• Repeat the
operation if necessary.
• Wash
stainless steel discs for reuse.
• If the brightness
is not enough, repeat this operation a second time.
If in case the ground
is in very bad condition you can restore it with Granite diamond pads.
Final say
Hopefully, the above-mentioned guide has helped you to get all the details about the Granite polishing system from quantity to process. So, if you too are looking for a solution to granite floor restoration then you can connect with Floorcareco, & our professional will assist whatever the help you need.
Comments