Why use the diamond marble pad in the 1st place?
The marble floors can at times, pose great difficulty in terms of polishing them. As they are of calcite formation, they get easily scratched and dull. To remove this, certain products must be used. In extension, even those products can cause damage to the floor, having said that, they are very sensitive. These calcite floor types need a practical solution such as the diamond marble pads by Bonastre System.
This pad has diamond dust induced in it which means as
a stone can be cut by another harder stone, the floors can be crush through
this pad with us. As grinding, honing, and polishing the marble floors is
tricky, the Bonastre pads have a system that works.
5 ways to shine marble floors with the
diamond marble pad.
· Red
Pad for Grinding: When grinding the marble floors with the red pad, use only
water and see how the scratches start to disappear. The red pad crushes through
the marble floor and removes even those scratches, stains, and marks from deep
within. But as the marble floors are prone to scratches, the red pad is bound to
leave minor scratches as well.
· Yellow
Pad for Honing: After the grinding step, minor scratches will be left on the
floor. Even if one doesn’t perform the grinding process, a light honing can be
done with the yellow pad. This pad works like a refiner.
· Green
Pad for Polishing: The green pad removes all the scratches made by the grinding
and honing diamond marble pad. Then the polishing process is done by the green
pad.
These pads are very easy
to use and even the in-house cleaning staff can use them with any standard
floor scrubbing machine. These products can be used monthly or as per the
requirement.
Marble polishing and restoration
for stains and repair use the diamond marble pads to grind down the surface. It
disclosures the fresh layer underneath to be refined for use. Then it polishes
the surface to be finer. At the end of this procedure, the marble floor achieves a
mirror-like finish.
The floor polisher with rough
grits grinds the marble quicker. Watch out for any over-cutting lippage. Too
high lippage can crack the stone at a high speed. Watch out for the speed of the
polisher and make sure to maintain a good speed.
The floor scrubbing
machine with the Bonastre pads and just water can easily get the marble floors
to shine, be no-slippery, and reflect the light falling on them. These are the
signs of a well-polished floor.
The diamond marble pad is
one such product that can go on for years, helping polish marble floors with
ease. The pad comes in many sizes and forms and can be used with machines or
the palm-sized one, the hand applicator kit can be used DIY.
Comments